Open the pattern in Adobe Reader.
On the left in Adobe Reader screen you can see small icons. Click the page icon on top and you will see miniatures of all the pages in numerical order.
Click the layer icon at the bottom and you will see the list of all the layers. On the left of the layer name there is an eye icon. Click it and the layer hides.
As default all layers are visible and you should select which sizes to print by turning off sizes you don’t want to print.
Print me! layer contains important information and therefore is mandatory with all sizes.
Select ”Actual size” from the printing settings and print the page, which contains test square. Measure it and if the size is intended continue printing.
WHAT TO DO IF THE TEST SQUARE PRINTS OUT TOO SMALL OR TOO LARGE?
Select ”Scale” from the printing settings.
Test square too small ==> scale 101% or 102%.
Test square too large ==> scale 99% or 98%.